Released 7/17/25 - Updated 7/10/25
[New Features]
Upgrade to Android 15
The board’s Android operating system will update to Android 15 with this firmware update.
Share Wi-Fi via QR code
Users can now share the board’s Wi-Fi credentials via QR code. To enable this, go to Admin menu → System Settings → QRcode share wifi.
Five-finger touchscreen gestures
Users can now customize five-finger touchscreen gestures under the BenQ Board Settings menu → Advanced → Touchscreen gestures.
The four gestures are:
- Slide Shrink: Pinch with five fingers.
- Slide Spread: Spread with five fingers.
- Slide Right: Swipe right with five fingers.
- Slide Left: Swipe left with five fingers.
Users can customize these gestures to perform the following actions:
- None - No Action
- Blank screen - Blanks the screen
- Home - Go to Android Home screen
- Recent - Opens up Recents Menu (same as Recent from Sidebar menu)
- Screenshot - Take a screenshot
Handwritten text input
Users can now use handwritten text recognition as an alternative to keyboard input and choose from 27 downloadable languages. To access this feature, navigate to the BenQ Board Settings menu → Advanced → Handwritten text input.
Multi-window Picture in Picture (PIP)
Users can now use the Picture-in-Picture function in Multi-window mode in up to six windows simultaneously, with support for five Android apps and one external source. 
CEC Wake-up
Users can now remotely wake up devices through CEC. Note: The board’s Android system will update the MCU firmware after this firmware update. Do not turn off the display until after this firmware update is complete.
Touch driver v7110
The touch driver will update to support Android 15.
System ROM storage warning
Users will now see a pop-up message warning them when the board’s storage space is running low.
Updated security patch to 2025-05-05
[Enhancements]
- Enhanced USB device compatibility.
- Optimized side-by-side multi-window app switching performance.
- Optimized the upgrade process by checking whether the USB disk contains the required firmware folder before initiating a system reboot from the Admin Menu.
[Fixed Issues]
- Fixed an issue that caused the board to reboot randomly.
- Fixed an issue that caused the operating system not to switch to the correct input source after wake-up.
- Fixed an issue that caused the board’s array mic not to function properly after disabling mic sharing.
- Fixed an issue that caused the Disable Logo function to become unavailable after a firmware update.
- Fixed an issue that caused the USB-C drive not to be recognized.
- Fixed an issue that caused NFC functionality to be disabled after enabling and disabling Corp Mode.
- Fixed an issue that caused swiping up from the bottom of the screen to return to the BenQ Board Launcher after enabling Corp Mode and rebooting the board to the input source.
- Fixed an issue that caused the USB Port Lock function in the Admin Menu not to display properly.
- Fixed an issue that caused screen blurring during Android mirroring with InstaShare 2.
- Fixed an issue that caused the minimized Host Controls window not to load in InstaShare 2 after launching the app and switching an input source.
- Fixed an issue that caused audio from an external source not to play in Picture in Picture (PiP) mode after playing a video from an external source and then enabling PiP and switching back to the external source.
- Fixed an issue in which the keyboard would not appear during Zoom login.
[Updated Apps]
- Account Settings to v2.1.22.0
- Launcher to v1.5.3.0
- IFPSidebar to v1.1.14.0
- IFPWidget to v1.2.1.0
- QOTA tool to v2.3.9.0
- EZWrite6 to v1.5.5.0
- EZTools to v1.2.8.0
- EZMath to v1.1.1.0
- AMS Files to v2.3.1.0
- AMS Office to v1.0.8.0
- BroadcastSetting to v2.4.23.0
- DMS Client to V3.3.7.0
- Easy Setting to v1.0.13.0
- BenQ App Store to v3.0.5.0
- Notification to v2.2.8.0
- InstaShare 2 to v1.7.17.0
- TeamViewer to v15.58.9099
[Update Instructions]
This update requires manual installation through DMS or on the BenQ Board.
Updating the firmware from DMS
⚠️ Warning
The firmware update restarts the devices automatically. Make sure to update the firmware during off hours.
- Go to https://dms.benq.com.
- Log in with your admin credentials.
- From the main menu, click Firmware. The list of available device models appears.
- Locate your BenQ Board model, and then click Update. The update summary appears.
- Review the update details, and then click Update.
Tip: You can also click Schedule to schedule the update at a later time.
Updating the firmware from the BenQ Board
⚠️ Warning
-
- The firmware update requires a system restart. Make sure to save all important data before proceeding.
- The update process may take a few minutes to complete. Ensure that there are no interruptions. Do not power off the device or disconnect from the internet to prevent permanent damage to the display.
- Open the Settings menu.
- Tap Advanced → System update.
- Tap Update system.
The system downloads and updates the firmware and then restarts automatically.